I mixed these ingredients and the toilet was spotless in just 5 minutes.

1. Prepare the surface

Flush the toilet to moisten the inner walls.

2. Apply the napkin method

• Soak absorbent paper with the mixture.
• Carefully place it under the inner rim , where dirt tends to accumulate.
• Do the same in areas with limescale or rust stains.
• Spray the mixture again onto the paper so that it is well impregnated.

3. Time of action

• Leave on for 20 to 30 minutes .
• If the dirt is heavy, it can be left for up to 1 hour .

Seat and exterior cleaning

While the product is working:

For the outdoor toilet

1. Mix equal parts water and vinegar in a spray bottle.
2. Spray the surface.
3. Wait 5 minutes and wipe with paper.

For the seat

1. Remove the seat by loosening the rear screws.
2. Moisten it.
3. Spray it with hydrogen peroxide .
4. Leave on for 5 minutes.
5. Wash with a sponge and detergent.
6. Rinse with warm water and let dry.

Peroxide helps to whiten, disinfect and eliminate odors .

Final cleaning of the interior

1. Carefully remove the napkins.
2. You’ll notice that the dirt will be softer.
3. Clean under the rim with the same napkin.
4. Use a sponge to finish removing residue.
5. Run your usual brush over the inside.
6. Replace the seat when it is dry (without overtightening the screws).

Result: a clean, fresh and odor-free toilet.

Tips and recommendations

• Vinegar works best when lukewarm , never boiling.
• Do not mix vinegar with chlorine or other strong chemicals.
• If the water in your area is very hard, perform this cleaning once a week .
• Wear gloves if you have sensitive skin.
• Keeping the toilet rim clean prevents most bad smells.
• For quick maintenance, you can spray diluted vinegar every few days.

With simple and inexpensive ingredients you probably already have at home, you can effectively remove limescale, bacteria, and odors from your toilet. By using this method regularly, your bathroom will stay more hygienic, shiny, and fresh without the need for harsh products.