This second trick works like a small handmade lamp that can be used outdoors or as an emergency light.
Materials
- Two glass containers with lids (that you no longer use)
- Drill
- Thin metal tube
- Chiffon
- Kerosene
- Lighter
Step by step
- Prepare the lids:
Place the two lids together and measure the center. Using a drill, make a hole in the middle of both. - Install the tube:
Insert a small metal tube through the two caps and secure it firmly. - Modify the top container:
Make a small hole in the back of the jar that will go on top. The bottom jar remains unchanged. - Create the wick:
Roll a piece of gauze into a small tube. Pass it through the inside of the metal tube, leaving a little bit sticking out at the top. - Add fuel:
Fill the bottom container with kerosene and allow the gauze to soak thoroughly. - Light:
Carefully light the exposed part of the gauze. The lamp will start working thanks to the absorption of the fuel.
Tips
- Always use thick, heat-resistant glass containers.
- Do not leave the candle or lamp lit unattended.
- Keep away from children and pets.
- Avoid overfilling the container with fuel.
- Work in a well-ventilated area, especially when using kerosene.
- Do not overheat the wax or let it boil.
Recommendations
- You can add a few drops of essential oil to the melted wax to scent your candle.
- If you use candle remnants of different colors, mix them to create decorative designs.
- Clean the jars thoroughly before reusing them to avoid flammable residues.
- If you notice excessive smoke, trim the exposed part of the wick slightly.
With simple, recycled materials, you can create useful solutions to light your home and make better use of available resources. These homemade alternatives not only help reduce waste but also encourage creativity and savings, always prioritizing safety at every step.
